Experimental study on bone grinding temperature and force under low temperature spray cooling
Lihui ZHANG; Shuo XIE; Mingfa LUO; Xudong WANG; Huichuang YANG · 2024 · Jin'gangshi yu moliao moju gongcheng
WASTE classifies this as Negative / Null Result Report · AI classification, approximate
The study found no significant effect — useful as a negative control or null benchmark for your own design.
Abstract
Objectives: Bone tissue grinding is one of the common and basic applications in orthopedic surgery clinics. The grinding process is energy-intensive and generates a lot of grinding heat. The accumulation of this heat may cause thermal damage to biological tissues. This paper presents experimental research to investigate the bone-grinding heat and the cooling method. Methods: The combined influence of nozzle position and feed direction on the cooling effect of bone grinding under cryogenic spray cooling conditions is experimentally investigated. A bone grinding platform with three-dimensional m
Abstract by Lihui ZHANG; Shuo XIE; Mingfa LUO; Xudong WANG; Huichuang YANG, Jin'gangshi yu moliao moju gongcheng (2024) — licensed CC BY 4.0.
About to run something similar?
Run an AI Precheck on your own design to catch failure modes like this one before you spend the time. Your first desk check is free.
Related failures
Stress-Strain Relationships of Fiber Reinforced Phosphogypsum under Uniaxial Compression
Negative / Null Result ReportEffect of storage in water and thermocycling on hardness and roughness of resin materials for temporary restorations
Negative / Null Result ReportUndetected perovskite phase interference with zirconolite dissolution measurements
Negative / Null Result ReportInvestigation on the Microstructure and Mechanical Properties of T23 Steel of Super-Critical Final Boiler Reheater after Long-Term Service
Null DatasetAluminium trihydroxide in combination with ammonium polyphosphate as flame retardants for unsaturated polyester resin
WASTE indexes this work — it does not host or republish it. Failure-type classification is automated and approximate.
Metadata source: DOAJ · DOI 10.13394/j.cnki.jgszz.2023.0238