e-ISSN: Pending
Negative / Null Result ReportOpen accessPhysics

Spatial resolution improvement of PICOSEC Micromegas precise timing detectors

F. M. Brunbauer; R. Aleksan; Y. Angelis; S. Aune; J. Bortfeldt; M. Brunoldi; J. Datta; D. Desforge · 2026 · arXiv

WASTE classifies this as Negative / Null Result Report · AI classification, approximate

The study found no significant effect — useful as a negative control or null benchmark for your own design.

Abstract (excerpt)

The combination of a Cherenkov radiator with a semi-transparent photocathode and a Micromegas based amplification stage allows PICOSEC Micromegas detectors to achieve a time resolution of better than 15ps. While tileable prototypes with 10x10 channels feature 1x1 cm^2 readout pads, finer readout granularity can be used to improve the spatial resolution. We report on the study of high readout granularity PICOSEC Micromegas prototypes which achieve around 0.5mm spatial resolution with 3.5mm large pads. No significant improvement was found when readout pad size was further reduced to 2.2mm. The t

Excerpt shown for reference under fair use — read the full paper at the publisher.

About to run something similar?

Run an AI Precheck on your own design to catch failure modes like this one before you spend the time. Your first desk check is free.

WASTE indexes this work — it does not host or republish it. Failure-type classification is automated and approximate.

Metadata source: arXiv